Swordfish

I HAVE CIRCUIT BETWEEN PIC18F252 AND DAC MCP4822, BUT I NEED TO TX 16 BITS, AND I´VE TRIED TO DO THIS WITH THE MODIFIERS LIKE Byte0,Byte1 to send Out data to the Dac, but it isn´t works. i´m sending two bytes, so i cut de Word in two bytes to transmit. if someone can help. tell me about the suggesti...

I'M WORKING ON PIC18F4680, AND I KNOW THAT SWORDFISH COMPILER COME WITH A MICROLOADER, AND IT USE SERIAL PORT TO PROGRAM THE PROGRAM CODE ON TH CHIP. I´M UNDESTANDING IT. I NEED TO KNOW WHAT I SHOULD DO IN THE PROGRAM CODE , BECAUSE THE MICROLOADER DON´T DOWNLOAD THE PROGRAM CODE IN THE PIC18F4680. ...

The controller is the T6963.

I going to change the width and heihgt parameters in the libary.
then i`m gonna tell you about it.

If you can see the T6963 datasheet should be good.

Thanks for your suggestions and comments about the solutions.

This is the code that i used Device =18F4680 Clock = 20 Config OSC=HS, FCMEN=OFF, IESO= OFF, 'CONFIG1H PWRT=ON, BOREN=OFF, BORV=1, 'CONFIG2L WDT=OFF,WDTPS = 128, 'CONFIG2H PBADEN = OFF,MCLRE=ON, 'CONFIG3H STVREN=ON,LVP=OFF,XINST=OFF,DEBUG=OFF, 'CONFIG4L CP0=ON, CP1=ON,CP2=ON,CP3=ON, 'CONFIG5L CPB=OF...

I´M USING PIC18F4680 AND GLCD 240x128 WITH S1D13700 BUT IT NOT WORKS.
THE REFERENCE ON IT IS "TG240x128A-05".

I know that this library work on 320x240 GLCD and work good.

I would like to recieve suggestions about it, to resolve my problem

Thanks

CAN SWORDFISH DO BOOTLOADER
ON RS232 AND USB ?[color=red][/color]