Search found 40 matches
- Thu Nov 13, 2014 2:03 pm
- Forum: User Modules
- Topic: Menu help
- Replies: 14
- Views: 10299
Re: Menu help
sent you another PM
- Thu Nov 13, 2014 1:11 pm
- Forum: User Modules
- Topic: Menu help
- Replies: 14
- Views: 10299
Re: Menu help
Regarding testing..I sent you PM
- Thu Nov 13, 2014 10:51 am
- Forum: User Modules
- Topic: Menu help
- Replies: 14
- Views: 10299
Re: Menu help
I don't quite understand how to set the Y position of the menu. If I change YMnuPos As Byte = 20 to YMnuPos As Byte = 50 .... there is no change in the menu's Y position. If I change XMnuPos the X position of the menu will change as expected.
- Thu Nov 13, 2014 10:22 am
- Forum: User Modules
- Topic: Menu help
- Replies: 14
- Views: 10299
Re: Menu help
Everything I need is working great!! I did need to change GLCD.Cls () as you mentioned. Thanks very much for your help. I will now be able to continue with the other portion of this project.
- Thu Nov 13, 2014 9:16 am
- Forum: User Modules
- Topic: Menu help
- Replies: 14
- Views: 10299
Re: Menu help
I have changed the [ ElseIf (PORTC And %00000111) = 7 Then ] line, compiled and ran it in Proteus. Everything works just as before including the single problem I had as descried early of not being able to scroll back up to the upper most line. As per you suggestion I will try to clean up the code an...
- Wed Nov 12, 2014 7:37 pm
- Forum: User Modules
- Topic: Menu help
- Replies: 14
- Views: 10299
Re: Menu help
They are there.. Dim UpButton As PORTC.0 Dim DownButton As PORTC.2 Dim SelectButton As PORTC.1 . . . If UpButton = 0 Then Inc(UpButtonCount) // Check each button and if a button is pressed then increase that button's counter by 1 ElseIf DownButton = 0 Then Inc(DownButtonCount) ElseIf SelectButton = ...
- Wed Nov 12, 2014 4:43 pm
- Forum: User Modules
- Topic: Menu help
- Replies: 14
- Views: 10299
Re: Menu help
I've spend some time utilizing parts of the LCD module and have most of what I want working except for one thing, which I can't figure out. I can enter the menu mode by pressing any button. I can manuver throught and out of menu mode. However I cannot move my selection arrow up to the second line in...
- Wed Oct 29, 2014 11:23 am
- Forum: User Modules
- Topic: Menu help
- Replies: 14
- Views: 10299
Re: Menu help
The LCD menu module you are referring to is for 4 line character LCD, quite different than a GLCD. Although I am very new to programming, I don't believe this will help me.
- Wed Oct 29, 2014 8:43 am
- Forum: User Modules
- Topic: Menu help
- Replies: 14
- Views: 10299
Menu help
Does anyone have a sample of "menu" code which will help me getting started on this GLCD project. I will have 3 buttons (up, down, select) to control the menu. I have attached a picture of an example of what I'm looking for.
- Fri Oct 24, 2014 9:18 am
- Forum: User Modules
- Topic: Looking for GLCD Menu sample code
- Replies: 5
- Views: 6387
Re: Looking for GLCD Menu sample code
Thanks for the code. However I'm still looking for an example of how to scroll and select menu items in a non touch screen GLCD scenario.
- Thu Oct 23, 2014 1:13 pm
- Forum: User Modules
- Topic: Looking for GLCD Menu sample code
- Replies: 5
- Views: 6387
Re: Looking for GLCD Menu sample code
I'm not looking for someones complete project. Just an example of how to configure up up, down, select buttons and navigate through a few screens.
- Thu Oct 23, 2014 1:09 pm
- Forum: User Modules
- Topic: Looking for GLCD Menu sample code
- Replies: 5
- Views: 6387
Re: Looking for GLCD Menu sample code
Thanks, However I'm looking for some sample used on a GLCD, not a 4 line LCD.
- Tue Oct 21, 2014 2:40 pm
- Forum: User Modules
- Topic: Looking for GLCD Menu sample code
- Replies: 5
- Views: 6387
Looking for GLCD Menu sample code
I'm new to programming and am looking for samples of GLCD menus. Any help would be greatly appreciated.
- Mon Oct 20, 2014 8:21 pm
- Forum: Modules
- Topic: GLCD KS0108 issue
- Replies: 17
- Views: 11323
Re: GLCD KS0108 issue
Jerry I used your suggestion, and utilized PORTA.0 for CS3 instead of PORTC.6.
It's working now. THANKS AGAIN!!
Would you know where I can find a example of code on how to setup 3 push button inputs for the purpose of editing GLCD menus? (ie, change date/time for clock, change variables, etc..)
It's working now. THANKS AGAIN!!
Would you know where I can find a example of code on how to setup 3 push button inputs for the purpose of editing GLCD menus? (ie, change date/time for clock, change variables, etc..)
- Mon Oct 20, 2014 6:05 pm
- Forum: Modules
- Topic: GLCD KS0108 issue
- Replies: 17
- Views: 11323
Re: GLCD KS0108 issue
Both gave the same result and did not work.
The outline worked with both, however when the baudrate and TXTSTA line lines were enabled, the right side display did not work including the outline.
The outline worked with both, however when the baudrate and TXTSTA line lines were enabled, the right side display did not work including the outline.