Swordfish

Hi Again, Looks like I've failed at the basics, i cant get an led to flash on internal osc i have the following code Device = 18F06Q41 Clock = 64 Config FEXTOSC = OFF, // Oscillator not enabled RSTOSC = HFINTOSC_64MHZ,// HFINTOSC with HFFRQ = 64 MHz and CDIV = 1:1 CLKOUTEN = OFF // CLKOUT function i...

Thanks Jerry for those links. We have bought 100 of the PIC18F06Q41 and I've designed a very simple board for purely for testing I'm interested in how good the adc is and how well the opamp works as I've not really tried using opamps on pics before.


Rich

Thanks for the offer Jerry



Rich

The chip shortage is kind of why i'm looking at these new parts, they cover most bases 12bit, 5v 64mhz and pps, except usb, and we are moving away from pic based usb anyway.

my plan was to buy some and test them and then buy a batch for stock if all looks good.

Thanks again.
Richard

Thanks for that Jerry. I have now ordered one and will design a test board to check out some of the features and report back.


on another Note was the Q43 sram errata fixed ? and if so, is it easy to get the new silicon?

Richard

I just wanted to give some feedback about JLC PCB, I'm sure you've seen it if you make anything with pic but they are fantastic we have been using them for a few years now and never had any problems. we startred off using them for developement but they were always good and now use them in production...

Hi I was wondering what peoples experiances were with the q41 parts. for me the PIC18F06Q41 looks very interesting for home projects, but more generally how have they worked for you? as i've had bad experiances with things like the adc in the k80 part. so... whats the adc like ? does it have any off...

it is odd, thanks for checking Jerry.

I'll see if there's anything that I've missed.

bizarrly my install of swordfish has stopped working again with asm errors

and on checking its back to ver 2.2.5 icc1.1.6.4

is this likely to my our it company reverting to a pervious setup?

that fixes it.

Thanks Jerry.

I did check one of the other pcb's with the preaviously used 14k50 and the baud rate was correct at 9600 . so i'm pretty sure something changed.

I must admit I don't normally use that low a baud rate but it was needed for historical reasons.
Rich

I do still have issues, my work computer seems to have some erratic issues with compiling/programming i'm starting to think our IT company have locked the machine down more than they should have.. Anyway even on my home computer i'm having some issues, I have used this pic before doing comms at 9600...

Thanks again Jerry for the quick reply. Si it didn't update to that version using the "help/about way. So I uninstalled it and re downloaded the full version on the sf site. that reported the the previous version did the help/about update and now it has updated to ver2.2.3.6 then i ran your linked e...

I've just been throught the process again and it still thinks there is an update available. so updated and still the same.

Hi I hope someone can help me. I've recently been having compiler problems with the code being erratic sometimes working and sometimes not even the oscillator running. I have used this pic before in other projects without issue. I'm not using usb it's just quite a small pic. anyway i thought i would...

Hi David, thanks for the quick reply, It's not completely clear to me yet whats going on as i'm not onsite very often and the information is a little second hand for me. but i was told it if sometimes fails to connect completely. but it will be an older driver as the firmware hasn't been changed for...