I've searched and failed...
Can anyone point me in the direction of SF code or routines where, using USB + SwordfishedPIC + memory, I can plug my device into a USB socket and it lets the PC know it's there AND then I can open Explorer and drag'n'drop or be Save / Save As.
I want to be able to save small .txt files direct to a memory chip (via PIC) from PC.
(i.e. behave like the front end of a memory stick as far as file saving is concerned).
MTIA.
USB Stickalike
Moderators: David Barker, Jerry Messina
No-one has done this on swordfish to my knowledge.
I briefly looked at porting the Microchip MSD (Mass Storage Device) to swordfish a while back but then decided to use the Microchip Libraries themselves as the base of my design.
Get the Microchip Application Library (MAL) and have a poke through at the USB-MSD demos and you'll get an idea at the amount of work required to port it. However, if all you need to do is as described, several of the demo's would work fine for you.
Regards,
I briefly looked at porting the Microchip MSD (Mass Storage Device) to swordfish a while back but then decided to use the Microchip Libraries themselves as the base of my design.
Get the Microchip Application Library (MAL) and have a poke through at the USB-MSD demos and you'll get an idea at the amount of work required to port it. However, if all you need to do is as described, several of the demo's would work fine for you.
Regards,