Thank you all for the help on compiling the bootloader for my PCB
I have compiled the bootloader for Pinguino but I like to use the same board with Swordfish (using 2 chips)
https://www.kickstarter.com/projects/71 ... e-like-ard
Or is there a possibility to use the Pinguino bootloader wit SF?
Thanks in advance,
Gerard
Ping2550 on kickstarter
Moderators: David Barker, Jerry Messina
Ping2550 on kickstarter
=> Take a look at my NEW Kickstarter Project at: http://goo.gl/jmIQxJ
Follow us on twitter:@broedsels
Like us on facebook: facebook.com/ping25xx
Follow us on twitter:@broedsels
Like us on facebook: facebook.com/ping25xx
- David Barker
- Swordfish Developer
- Posts: 1214
- Joined: Tue Oct 03, 2006 7:01 pm
- Location: Saltburn by the Sea, UK
- Contact:
Re: Ping2550 on kickstarter
> Or is there a possibility to use the Pinguino bootloader wit SF?
If the Pinguino bootloader can work from the command line, then you can get it to work with the Swordfish IDE.
If the Pinguino bootloader can work from the command line, then you can get it to work with the Swordfish IDE.
Re: Ping2550 on kickstarter
I have checked with the other bootloaders and these are doing OK now.
=> Take a look at my NEW Kickstarter Project at: http://goo.gl/jmIQxJ
Follow us on twitter:@broedsels
Like us on facebook: facebook.com/ping25xx
Follow us on twitter:@broedsels
Like us on facebook: facebook.com/ping25xx