Re: USB Bootloader with PICKit 2? Confused!
Posted: Sat Jul 25, 2015 10:01 pm
Hi guys,
Can I just say that I have the old version RKPK40 with the two voltage regulators, which I think is the same one has Aresby has and my board works ok, with the following changes:
I have a 20mhz crystal (and caps) fitted to my board instead of the 10mhz crystal supplied in the kit/on board, and the only change to Rangerbob usb keyboard code
was to comment out the bootloader code which was mentioned a few posts ago:
The board also requires you to manually link the usb lines D+ and D- (pin header J38) to the correct connections on the PIC lines, the following image shows what I mean:
Can I just say that I have the old version RKPK40 with the two voltage regulators, which I think is the same one has Aresby has and my board works ok, with the following changes:
I have a 20mhz crystal (and caps) fitted to my board instead of the 10mhz crystal supplied in the kit/on board, and the only change to Rangerbob usb keyboard code
was to comment out the bootloader code which was mentioned a few posts ago:
Code: Select all
// Use with FSUSB Bootloader
'#option org_reset = $0800