I used some code I had to test my hardware it was in Pic basic pro
Now my Swordfish USB is no longer loaded the right divers It's loading the microcode usb drivers
Any one have this happen?
Pic basic pro USB and swordfish USB
Moderators: David Barker, Jerry Messina
- David Barker
- Swordfish Developer
- Posts: 1214
- Joined: Tue Oct 03, 2006 7:01 pm
- Location: Saltburn by the Sea, UK
- Contact:
This installs the drivers It' s PBP I use MicroCode plus
But now I can't use I for some reason It will not install for swordfish now
It pops up and tells you it's Install for swordfish but it don't load the driver
It said divers not found but there there.
usbser.sys and mdmcpq.inf
I was testing my hardware to make shore it worked with some old test code because I couldn't get the 18f14k50 to work with swordfish USB CDC
So i put the 18f14k50 away and used a 18f2550 and swordfish and now I can't load the divers changes computers and it works fine.
But now I can't use I for some reason It will not install for swordfish now
It pops up and tells you it's Install for swordfish but it don't load the driver
It said divers not found but there there.
usbser.sys and mdmcpq.inf
I was testing my hardware to make shore it worked with some old test code because I couldn't get the 18f14k50 to work with swordfish USB CDC
So i put the 18f14k50 away and used a 18f2550 and swordfish and now I can't load the divers changes computers and it works fine.
Code: Select all
; Windows USB CDC ACM Setup File
; Copyright (c) 2000 Microsoft Corporation
; Copyright (C) 2007 Microchip Technology Inc.
[Version]
Signature="$Windows NT$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%MCHP%
LayoutFile=layout.inf
DriverVer=08/18/2001,5.1.2600.0
[Manufacturer]
%MFGNAME%=DeviceList
[DestinationDirs]
DefaultDestDir=12
[SourceDisksFiles]
[SourceDisksNames]
[DeviceList]
; When developing your custom USB device, the VID and PID used in the PC side
; application program and the firmware on the microcontroller must match.
; Modify the below line to use your VID and PID. Use the format as shown below.
; Note: One INF file can be used for multiple devices with different VID and PIDs.
; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
%DESCRIPTION%=DriverInstall, USB\VID_04D8&PID_000A
;------------------------------------------------------------------------------
; Windows 2000/XP/Vista-32bit Sections
;------------------------------------------------------------------------------
[DriverInstall.nt]
include=mdmcpq.inf
CopyFiles=DriverCopyFiles
AddReg=DriverInstall.nt.AddReg
[DriverCopyFiles]
usbser.sys,,,0x20
[DriverInstall.nt.AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,usbser.sys
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
[DriverInstall.nt.Services]
AddService=usbser, 0x00000002, DriverService
[DriverService]
DisplayName=%SERVICE%
ServiceType=1
StartType=3
ErrorControl=1
ServiceBinary=%12%\usbser.sys
;------------------------------------------------------------------------------
; String Definitions
;------------------------------------------------------------------------------
[Strings]
MCHP="Microchip Technology Inc."
MFGNAME="Microchip Technology Inc."
DESCRIPTION="Communications Port"
SERVICE="USB RS-232 Emulation Driver"
- David Barker
- Swordfish Developer
- Posts: 1214
- Joined: Tue Oct 03, 2006 7:01 pm
- Location: Saltburn by the Sea, UK
- Contact: