This is the code that i used
Device =18F4680
Clock = 20
Config
OSC=HS, FCMEN=OFF, IESO= OFF, 'CONFIG1H
PWRT=ON, BOREN=OFF, BORV=1, 'CONFIG2L
WDT=OFF,WDTPS = 128, 'CONFIG2H
PBADEN = OFF,MCLRE=ON, 'CONFIG3H
STVREN=ON,LVP=OFF,XINST=OFF,DEBUG=OFF, 'CONFIG4L
CP0=ON, CP1=ON,CP2=ON,CP3=ON, 'CONFIG5L
CPB=OFF, CPD=OFF 'CONFIG5H
'WRT0,WRT1,WRT2,WRT3 'CONFIG6L
'WRTB,WRTC,WRTD 'CONFIG6H
'EBTR0,EBTR1,EBTR2,EBTR3 'CONFIG7L
'EBTRB 'CONFIG7H
'---------------------------------------------------------------------------
#option GLCD_MODEL = S1D13700 'GLCD driver
#option GLCD_MODE = 8080 'selecciono el modo de la interface
#option GLCD_DATA = PORTD 'seteo el puerto que maneja el bus de datos
#option GLCD_RD = PORTB.6 'seteo el pin de RD(modo 8080) o EN(modo 6800)
#option GLCD_WR = PORTB.7 'seteo el pin de WR(modo 8080) o R/W(modo 6800)
#option GLCD_A0 = PORTB.4 'asigno pin a A0 que es el mismo C/D
#option GLCD_CS = PORTB.5 'asigno pin a la señal CS
#option GLCD_RES = PORTB.1 //' asigno el pin del reset aun pin
Include "INI_PORTS_PIC18F4680.bas" //BY: MARCOX
Include "GLCD.bas"
Include "graphics.bas"
Include "S1D13700.bas"
Include "Convert.bas"
Include "IMAGENS_TRUCK1.bas"
Include "FixedFont.bas"
[/img][url]
http://www.tinsharp.com/en/displayprodu ... ID=1507010
i need i library that works on TC6963C CONTROLLER.
if exist some posibility to make changes on S1d13700 library, will be good.
Thanks for your help